Giới thiệu
OPTseries video optical transceiver adopts the advanced digital video and opticalfiber transmission technology, and implement the real-time transmission &synchronization, no-distortion and high quality 16-channel video signal on thesingle fiber. 16-channel video optical transceiver adopts the full digital videonon-compression transmission technology and high quality video effect, whichcan meet the user’s requirements; the play-and-plug design makes theinstallation more convenient and easier, and it is unnecessary to implement thespot adjustment; its optical module and core circuit adopts the importedcomponents that have high stability, and all optical & electricalinterfaces conform to the international standards, which is applied to thedifferent working environment. This optical transceiver with video statusindication can monitor the normal operation of system.
Tính năng
- 8/10-bit digital code and non-compression type videotransmission
- Support any high-resolution video signal
- 5Hz-10MHz video channel
- Automatic compatible PAL, NTSC and SECAM video system
- With APC circuit, constant input optical power, and largedynamic range
- Kilomega optical fiber transmission, large capacity, andeasy to upgrade
- Power supply and other parameter state indication, whichcan monitor the operation condition of system
- Support no-damage regenerative trunk of video
- Advanced self-adapting technology, and it is unnecessary toimplement the adjustment of spot electrics or optics when using
- Industry-grade design and modularization design make theequipment reliable and flexible
Thông số kỹ thuật
| OpticalFeature |
Transfer Distance: up to 120km
Connectors: ST/PC, FC/PC optional
Wavelength: 1310nm/1550nm |
| VideoFeature |
Video Interface: BNC
Video input/output impedance: 75Ω (unbalanced)
Video input/output Voltage: 1VP - P (peak value),Max 1.2Vpp
Video Bandwidth: 10MHz
Video sampling: 15MHz high speed sampling
Video digit bit width: 8/10 bit
Differential gain: （ 10%-90%APL） DG <1%( Typical value)
Differential phase: （ 10%-90%APL） DP <0.8<>°( Typical value)
Video SNR: S/N ≥ 70dB （Maximum optical link path loss） |
| AudioFeatures |
Audio interface: Forward Direction, Reverse Direction orBi-directional Audio
Interface terminal: Standard industrial connectingterminals
Audio input/output electric level typical: 0dBm
Audio input/output impedance: 600Ω (balanced/unbalanced)
Audio input/output amplitude: 2VP-P(peak value)
Audio bandwidth: 20Hz～20kHz
Sample rate: 58.6K
Nonlinear distortion coefficient: ≤1%
Audio SNR: S/N≥85db |
| DataFeatures |
Interface：Standard industrialconnecting terminals
Controlling Equipment： PTZ decoder,Keyboard ,data interface of Matrix, High speed dome camera, industrial equipment
Interface Signals: RS-485(2 lines), RS232, RS422 and so on |
| AlarmFeatures |
Interface：standard industrialconnecting terminals ( Alarm, Switch, Remote control )
Alarm/switch input signals: any active or passivealarm/switch input, supporting passive switch
Alarm/switch output signals: any active or passivealarm/switch output, supporting relay contact output
Current: Low current, High-current and high-voltage can useabove 1A/12V |
| EthernetFeatures |
Interface Speed Rate: 10/100Mbit/s Auto-adaptation, thedefault is 100MBPS working condition
Interface Type: RJ-45
Supporting Agreements: IEEE802.3U 100Base-TX, 10/100M
Communication Working format: Full-duplex or half-duplex |
| TelephoneFeatures |
Physical Interface: RJ-11 Connector Jack
Voice Bandwidth: 8KHZ
Operating Mode: Point-to-point hotline, programcontrolled switch/extension mode |
| GeneralParameter |
Operating Temperature: -40 ℃～+85 ℃
Storage Temperature: -45 ℃～+95 ℃
Relative humidity: 0～95%(Non-condensing)
Power Voltage: AC85-260v/50Hz
MTBF：≥105 hours
Housing: Metal enclosure |
Thông tin sản phẩm
| Model No. |
Description |
| OPT-S16V-T/RF |
16 Channel Video, FC |
| OPT-S16V1D-T/RF |
16 Channel Video + 1 Channel Data, FC |
| OPT-S16V1D1A-T/RF |
16 Channel Video + 1 Channel Data + 1 Channel Audio, FC |
Viết đánh giá