1 channel video over fiber converter

SKU:

AN-DV1000 series

Viết đánh giá

Nhận báo giá

ADD TO CART
- 0

MÔ TẢ
HƯỚNG DẪN MUA HÀNG

Nội dung bài viết [hide]

1 Giới thiệu
2 Tính năng
3 Thông số kỹ thuật
4 Thông tin sản phẩm

Giới thiệu

AN-DV1000 series video fiber converter supports any high resolution dynamic or stationary picture high-fidelity transmit. It also can be anti-disturbance against several signals, environment, and work stably. It is widely used in security monitoring and control, high way, electronical policy management, automation control, intelligent residential districts and so on.

It can work shortly after it is installed. You could select any date interface by set. It is connected easily and it can indicate power supply, link, video, also adjust video. There are three way installation kits available: desktop and rack mount;

It can be used in varios ways, for example:

Intelligent transportation system;
High speed way video monitoring and control system;
Toll monitoring and control system;
Close circuit TV industry monitoring and control;
TV program switching channel transmit;
High-fidelity video conference system;
Security monitoring and control system.

Tính năng

Completely digital fiber transmit platform;
No need to configuration or any adjusting during the instalation, user friendly design;
video fiber converter is °based on self copyright IC;
No interference between analog in adjusting channel, picture and range;
4 steps filtering;
Completely digital, broadcast transmition efficiently managed by specific IC;
High speed 10/100M Ethernet channel;
Full speed asynchronous date channel;
Flexible configuration on the same platform;
Power supply, link, video by dynamic indication;
Self-adapt in PAL, NTSC, SECAM standards;
ASIC based design;
transmit distance: up to 100KM
Power supply:220v,-48v,+24, +12v,+5(optional), any specific on reuqest;
SNMP management;
Three installation types: wall method, rack in 19inches 1U, or plug in-card.

Thông số kỹ thuật

Video interface:

Input/output impedance: BNC 75 ohm unbalance interface
Input/output voltage: peak 1 vpp, max 1.5 Vpp
Signal: PAL/NTSC/SECAM
Video bandwidth: 8MHZ
Video number wide: 8/10/12 bit
Differential gain: <1%
Differential phase: <0.6°
Slope: <0.5%
Luminance delay inequality: 10ns
Luminance gain gap: ±10%
Weighted noise ratio: 66db

Date interface (can support 1~4 line asynchronous date RS-232/485/422)

Physical interface: industry standard terminal lead
Full duplex/half duplex
Interface type: RS-232/485/422 Manchester
RS232 rate 0-115.2Kbps
RS-422/485 rate: 0-115.2Kbps
RS-422/485 transmit distance: 0-1200m
RS-422/485 agreement support RS-485/422 agreement
Error rate: <10-9
Fiber interface
Physical interface: FC/PC/ST/PC
Fiber type: single/multi mode
Transmit distance: multi mode up to 2 km, single mode up to 100 km, WDM available

Audio interface:

supports 1 line optional and bidirectional audio
Audio input/output: impedance 600 balance/unbalance interface industry standard terminal lead.
Audio input/output level: 2Vp-p
Frequency response: 10 Hz-20 KHz
Audio channel width: 24 bit
Weighted noise ratio: 80db
Total Harmonic Distortion: 0.1%

Ethernet interface

Physical interface: shielding RJ-45
support IEEE 802.3/802.3u/802.1q VLAN
IEEE 802.3x full duplex and Back-Pressure half duplex flow control.

Working environment

Work temperature: -30~+75
storage temperature -45~+85
humidity : 0-95% without condensation
input voltage :220V-48V,+24V+12,+5V optional
power 5W (single terminal)
size : 482.6X 260X 25.4mm

Thông tin sản phẩm

DV:	Digital Video complete product series
first number (1)	number of channels of positive broadcast video signal
second number( 0 )	number of channels of positive high-fidelity audio
third number( 1)	number of channels of asynchronous date
forth number (1)	number of channels of Ethernet;
fifth number( 0)	number of telephone channels
first letter	Z means positive video ,F means passive video, D means bidirectional video
second letter	Z means positive audio ,F means passive audio, D means bidirectional audio
third letter	Z means positive asynchronous date, F means passive asynchronous date, D means bidirectional asynchronous date
fourth letter	S means signal module 1310nm, U means singlel mode 1550nm M means multi mode 1300nm W means1310nm/1550nm WDM
fifth letter:	T means transmitter, R means receiver

Tham khảo thêm các sản phẩm khác của Công ty TNHH Công Nghệ và Viễn Thông Hải Phong chúng tôi

Quý khách hàng sau khi chọn được sản phẩm phù hợp có thể mua hàng bằng 2 hình thức sau:

1 Trực tiếp:

CÔNG TY TNHH CÔNG NGHỆ VÀ VIỄN THÔNG HẢI PHONG
Địa chỉ : Số 20 ngõ 165/4 Chùa Bộc, Phường Trung Liệt, Q.Đống Đa, TP.Hà Nội
VPGD: Số 8-9 Dãy A4 Đầm Trấu, P.Bạch Đằng, Hai Bà Trưng, Hà Nội
Email: sales@hptt.vn - cuongnm@hptt.vn - ngocnx@hptt.vn - tranvietanh@hptt.vn - dangvietthang@hptt.vn
Điện thoại: 02432008042 - 0902175848 - 0986546768 - 0868886229 - 0914240896
Skype, Zalo, Whatsapp, Viber Online....0902175848 - 0986546768 - 0868886229 - 0914240896

2. Để lại thông tin:

Quý khách để lại thông tin ở phần Nhận Báo Giá hoặc Liên Hệ, bao gồm SĐT - Sản phẩm muốn mua - Địa chỉ nhận hàng. Nhân viên của Hải Phong sẽ liên hệ tới bạn trong vòng 12h.

Trân trọng cảm ơn...!

Đánh giá sản phẩm

Viết đánh giá