Video Signal Surge Protector

SKU:

FL-BNC

FL-BNC video signal surge protector is designed by IEC61000-4-5 and ITU-TK20&K21 standard. It adopts multilevel protective circuit, gas discharge tube and semiconductor discharge tube etc. which has quick response, low residual voltage output and excellent transmission performance. It adopts standard BNC as its interface which is easy to use and suit for all video signals lightning protection in coaxial cable transmission.

​​​​​​​  

Giới thiệu

FL-BNC video signal surge protector is designed by IEC61000-4-5 and ITU-TK20&K21 standard. It adopts multilevel protective circuit, gas discharge tube and semiconductor discharge tube etc. which has quick response, low residual voltage output and excellent transmission performance. It adopts standard BNC as its interface which is easy to use and suit for all video signals lightning protection in coaxial cable transmission.

FL-BNC signal lightning protector is designed and manufactured on the principle of discharge, limited current, clamping, stabilivolt. When signal wire gets an overvoltage and overcurrent shock, it will put lightning power or its jamming signal into the ground. Overvoltage restriction enables electrical equipment to operate safely within allowable range.

This product adopts metal housing and good sealing, which has anti-dust and anti-corrosion function. It is connected and installed between protected device and coaxial feeder in series that can restrain high voltage pulse on the wire to prevent backend device from being damaged by lightning and industrial surge. It can be widely used in coaxial transmission devices like hard disk recorder, video monitoring device, thinnet and thicknet network line of trunk between buildings, CATV, public television, satellite television receiver and VOD (video-on- demand) system etc. to avoid overcurrent damage like induction lightning strike, power supply anomaly and electrostatic discharge introduced by system.

Thông số kỹ thuật

Interface

 

Standard: IEC 61000-4-5, ITU-TK20&K21

Interface quantity: 1 video signal input and output

Nominal discharge current In: 5kA (8/20µs simulated lightning waveform)

Maximum discharge current Imax: 10kA (8/20µs simulated lightning waveform)

Nominal operating voltage: 5V(other special voltage is customizable)

Limited voltage Up: ≤30V

Applicable rate fg(3dB): 10Mbps

Insertion loss: ≤0.5dB

Response time: ≤10ns 

Interface form: BNC, N(16)

Characteristic impedance: 50Ω or 75Ω

Rackmount protection line: 9, 12, 16, 24 (optional)

 

Environmental

Limit

 

Operating temperature: -20~60℃

Storage temperature: -25~85℃

Relative humidity: 5%~95% (no condensation)

 

Physical

Characteristic

 

Housing: metal

Dimension (W x H x D): 86mm×25mm×25mm

Weight: 70g

 

Certification

 

CE, FCC, RoHS

 

Warranty

 

1 year

 

Download


Quý khách hàng sau khi chọn được sản phẩm phù hợp có thể mua hàng bằng 2 hình thức sau:


  1. Liên hệ trực tiếp cho Hải Phong:  Theo số Hotline:  0986546768 hoặc 02432008042  để được tư vấn và giao hàng nhanh nhất!
  2. Để lại thông tin: Quý khách để lại thông tin ở phần Nhận Báo Giá hoặc Liên Hệ, bao gồm SĐT - Sản phẩm muốn mua - Địa chỉ nhận hàng. Nhân viên của Hải Phong sẽ gọi lại cho bạn trong vòng 12h. 
Đánh giá sản phẩm

Sản phẩm đã xem

back top

Hotline liên hệ: 0986546768 - 0902175848