The OPT-GY2011 series industrial Gigabit media converters are designed to provide reliable and stable 10/100/1000BaseT(X) to 1000Base-FX SFP media conversion in harsh industrial environments. OPT-GY2011 series supports redundant power inputs, IP40 protection class and meets EMC industrial level 4 requirements.
Giới thiệu
The OPT-GY2011 series industrial Gigabit media converters are designed to provide reliable and stable 10/100/1000BaseT(X) to 1000Base-FX SFP media conversion in harsh industrial environments. OPT-GY2011 series supports redundant power inputs, IP40 protection class and meets EMC industrial level 4 requirements. Its operating temperature ranges from -40 to 85°C. Belonging to Optone Green Ethernet switches series, OPT-GY2011 series full load power consumption is as low as 2.5 watts.
Tính năng
- Green Ethernet solution with ultra low power consumption design
- Both standard and wide operating temperature
- Complies with IEEE 802.3, IEEE 802.3u, IEEE802.3z, IEEE802.3ab, IEEE 802.3x auto-negotiation
- Extends distances ranging from 550m (multi-mode fiber) to 120km (single mode fiber)
- Supports auto MDI/MDIX function
- Status LED for easy monitoring of device status
- Supports up to 10K Byte Jumbo frames
- Support 8k MAC address
- IP40 protection class
Thông số kỹ thuật
| Interface |
1 x Ethernet port (RJ45) 10/100/1000Base-Tx 1 x Optical port (SFP) 1000Base-Fx |
| Optical Port |
Available for 1310nm and 1550nm Single mode, and 850nm Multi mode Transfer Distance: up to 120km Connectors: SFP Fiber core: 8.3μm, 8.7μm, 9μm and 10μm on single-mode fiber; 50, 62.5 and 100μm on multi-mode fiber |
| Ethernet Port |
Standard: IEEE802.3, IEEE802.3u, IEEE 802.3ab, IEEE802.3x Available speed: force 10Mbps, force 100Mbps, force 1000Mbps and auto-detective 10/100/1000Mbps Full-Duplex and Half-Duplex auto-negotiation Connectors: RJ-45 Connector; MDI/MDI-X connection auto-sensing |
| Switch Properties |
MAC Table: 8K Packet Buffer: 1Mbit Switching Delay:
To Top
|